Energy Saving Agreement

With regular maintenance to your HVAC unit, you will prevent small problems from becoming big problems and ensure optimal performance of your comfort system. We offer energy saving service agreements in the Spring and Fall.

Regular maintenance will:

  • Provide longer lasting equipment
  • Reduce utility bills
  • Reduce repairs
  • Provide a more comfortable indoor environment
  • Protect your investment

What we do during a Performance Tune-Up:

Air Conditioning:

  • Check air handler filters and replace filters if necessary
  • Check for adequate refrigerant charge
  • Check condenser and clean if necessary
  • Lubricate condenser fan motor and check condenser blade for tightness
  • Tighten all electrical connections and check voltage at unit under full load
  • Check condensate drain lines for blockage
  • Lubricate all bearings and check blower for cleanliness
  • Check all safety control’s including lock out controls if used
  • Inspect contactor contacts
  • Check thermostat
  • Check evaporator coil for cleanliness, if accessible
  • Inspect starting and running capacitors
  • Check for vibration and noise
  • Check and record starting and running amps
  • Make recommendations for any needed repairs to system
  • Apply service sticker

Heating:

  • Check thermostat operation
  • Check fan limit control
  • Check blower operation
  • Check gas valve
  • Check fan speed
  • Check fan belts
  • Check temperature rise
  • Clean and/or replace standard air filter
  • Check all wiring connections
  • Check and clean all burners
  • Check burner ignition
  • Check pilot and pilot safety
  • Check and oil fan motor bearings (if needed)
  • Check smoke pipe, chimney base and proper drafting of chimney
  • Check draft hood
  • Check all pressure switches
  • Check PVC intake and exhaust piping
  • Check circulator pump and couplings
  • Check high limit safety control
  • Check low water cut-off
  • Check and clean gauge glass
  • Check safety relief valve